How To Connect Alesis Nitro Mesh To Computer

Getting started with the Alesis Control Mesh Kit

In this guide, we'll show you how to annals, set up, and connect your Alesis Command Mesh drum kit. We'll also prove you lot how to navigate the module. Follow the sections below to get started.

1. Register the Alesis Control Mesh Kit
2. Alesis Command Mesh setup and connections
   • Command Mesh kit pad and module connections
   • Connect the Command Mesh kit to your computer
3. Updating the Alesis Command module settings
   • Utility settings
   • Trigger settings

Register the Alesis Control Mesh Kit

The first matter you'll desire to do is to register your Command Mesh kit with Alesis. By registering your kit, yous'll go admission to a coupon lawmaking for 40 free drum lessons from Melodics, boosted software downloads, and an extended warranty. Make sure to have your Sweetwater invoice, as you'll need to enter the purchase engagement. Follow these instructions to become registered.

1. Log in to your Alesis account. If you don't accept one withal, you tin can create one here.
2. Navigate to the Alesis registration page, use the Product drib box and select the Surge.
3. Enter the series number (located on the module packing box, underneath the module, and on the front folio of the manual), enter the purchase date on your Sweetwater invoice, and then click Register My Product.
4. Go to the Melodics homepage and download the free app for your OS. In one case downloaded, go to your Downloads folder, run the installer, and then launch the app.
5. When prompted to enter your promo code, go to your Alesis account's My Products section, and then re-create and paste the code listed.

Click the image to register your Alesis Command Mesh drum kit.

Click the image to download your gratis copy of Melodics.

Return to top

Alesis Control Mesh Kit setup and connections

Once your Command Mesh kit has been registered, y'all can then assemble it and get everything connected. When you open the box, at that place will be smaller boxes that incorporate each role of the kit. To build your new Alesis Command Mesh kit, follow the included assembly guide. Likewise, be sure to check out this useful video from Alesis. While this shows how to get together an Alesis Nitro kit, the instructions are the aforementioned for your Alesis Command Mesh.

Control Mesh kit pad and module connections

Afterward the kit has been fully assembled, yous'll need to utilize the included wiring harness to connect your pads to the module. Each cable is labeled with the pad information technology should exist continued to, so ensure all of the cables are continued to the right drum or cymbal pad to trigger the correct audio, especially the hi-hat connections. Also, make certain that the wiring harness is fully secured to the module.

If you want to expand your Command Mesh kit even farther, in that location are two unused connections on the back of the module. These two ports support unmarried-zone pads and will require TS cables.

TIP: Keep your cabling groovy and utilise the included velcro cable straps that came with your Control Mesh kit. Non only volition it continue it tidy, but information technology'll ensure that your cables don't get tangled up.

Connect the Control Mesh Kit to your computer

You can connect your Command Mesh module to a estimator and use it as a MIDI controller. All you lot need to exercise is use a USB B-A cable and connect information technology to any USB ii.0 port on your computer. The Command Mesh kit is class-compliant, so no boosted drivers are necessary to perform correctly. The only thing you'll need to practise is set it upward equally a MIDI device in your DAW or standalone drum software and showtime playing!

Return to top

Updating the Alesis Command module settings

Now that you have everything set up the way yous want, it'southward time to change the Command Mesh's module settings. These settings include utility and trigger settings, likewise as USB thumb drive and kit settings. Follow these steps to select one of the following menus:

1. Printing theKitbutton, then pressCarte.
2. Use theUpwardandDownwardsarrows to cull ane of the menus listed below, so pressEnter.
3. If y'all are adjusting thetriggersettings, you'll need to strike the pad yous desire to edit.

TheUtilitymenu allows y'all to change any global settings, similar MIDI, power, and pad command settings. To get to the Utility menu, pressKit, printingMenu, then use theDownandUpwardlybuttons to selectUtility.

• GM Mode: When GM Mode is turned on, MIDI messages sent to your module's MIDI In will trigger sounds from theGeneral MIDI (GM). When turned off, all MIDI messages sent to the module's MIDI In will trigger the module's built-in sounds.
  
• Local Ctrl: WhenLocal Command is turned on, the pads will trigger the drum module's internal sounds. When it's turned off, playing the pads will instead transport MIDI notes from the module to a connected reckoner or MIDI device and trigger those sounds instead.
  
• Lefty Mode: If you're a left-handed drummer, then you're in luck. When Lefty Style is turned on, all of the pads are reversed to adjust left-handed drumming.
  
• Automobile Ability: While it's mutual to turn the module off after you lot've finished playing, you tin can prepare the pulsate module to ability off automatically if it is not used for a certain amount of time.
  
• Contrast: Changes the contrast of the display.

When you go into theTriggermenu, you'll update individual pad settings, which will help accommodate the manner you play. The manufacturing plant settings are a great starting point, only you lot may want to tweak them if you're experiencing mistriggers, or they don't sound dynamic enough.

• Sensitivity: The sensitivity changes the responsiveness when yous strike a pad. The higher the value, the less forcefully you lot need to play to generate a loud striking.
  • TheRim Sens (sensitivity) parameter achieves the aforementioned thing, but but with the drum pad's rim.
    
• Threshold: The threshold changes how hard you accept to hit the pad to generate a audio. The college the value, the harder you lot have to hit information technology. This works hand in mitt with sensitivity, and then you may take to go back and forth betwixt the ii to find the right setting.
  
• Head-Rim Adj: This setting volition determine the crosstalk between the head and rim of the drum pad. For instance, if you increase this parameter, the less hazard you have of triggering the Rim sound when striking the center of the pad.
  • If the setting is besides high, you may not be able to trigger the sound if yous're performing a rimshot.
    
• Xtalk (crosstalk): This determines the crosstalk between pads. When you hit a drum pad, others may trigger due to the vibration of the pulsate rack. These vibrations are magnified if your Control Mesh kit is on a hard flooring. So if you're hitting one pad, and multiple sounds are triggering, increase the crosstalk.
  
• Curve (velocity curve): The velocity bend will adapt the amount of playing forcefulness in relation to the sample's volume.

Render to top

Related content

• Alesis Command Module User Guide
• Alesis Control Mesh Kit Assembly Guide
• Alesis Control Module Voice List

When you lot need assistance, Sweetwater has the answers!

Our cognition base of operations contains over 28,000 expertly written tech articles that will give you answers and help you become the most out of your gear. Our pro musicians and gear experts update content daily to go on you informed and on your way. All-time of all, information technology'south totally FREE, and it's just another reason that you get more at Sweetwater.com.

Source: https://www.sweetwater.com/sweetcare/articles/alesis-command-mesh-setup-guide/

Share this post